IC-PQ2-PMCb PMC is an high integrated module with single board computer functionalities. This rugged PMC board is intended for embedded application with specifi c needs of conduction-cooled systems. This card has been designed in accordance with ANSI Vita 20 and IEEE1386.1
PCI mezzanine card standard. It features a high performance 32-bits PowerPC processor with three Fast Ethernet controllers.
IC-PQ2-PMCb can be used in conjunction with Compact- PCI, VME carriers or proprietary design. Many networks or embedded applications can be developed on-board : Processor module with a need of high level of integration and low power consumption.Communication controller with Multi-Ethernet Links.Ethernet channels with redundancy.
PPC603e with FPU 32 bits RISC架构带有 :266MHz CPU
16KB 指令 Cache 和 16KB 数据Cache.
64KB 板上双端口 SRAM.
MMU 和 FPU
64 or 128MB 共享DRAM带有ECC.
8 or 32 MB of Nor Flash EPROM.
32KB SPI EEPROM
PCI 接口启动, 目标机 & 主机t:
32 bits @ 33 MHz
3.3V only PCI signaling Rev 2.2.
I/O Pn4 和Pn3连接器 :
143.75*74mm, stacking height 10mm.
3.3VDC only with less than 3 W for maximum confi guration.
EMC/EMI : 89/336/ECC, EN55022 ClE, EN50082-2.
PowerPC embedded core
372 MIPS and 6,6SPEC95 @ 266MHZ.
FPU, MMU, 16KB IC & 16KB ID.
64 KB internal SRAM.
64 or 128 MB 64-bits wide with ECC.
Power management with self-refresh.
Fast access 10ns (22.214.171.124).
Flash or EEprom
8/32MB Mirror-NOR Flash.
32KB of EEPROM on the SPI bus.
4 virtual independent channels.
8, 16, 32 bits peripheral support.
Scatter/gather with command/data chaining.
Transfers supported include: PCI, memory, internal I/O.
32-bit, 33MHz PCI version 2.2 compatible.
Signalization 3.3VDC only.
A poll of read and write buffers.
PCI host bridge and peripheral capabilities.
Monarch, Non-Monarch or stand-alone mode.
4 independent DMA channels.
Compliant with IEEE802.3, 802.3u, 802.3x.
10/100Base TX auto-sensing.
Other on-board functions
Temperature sensor usable via the SPI bus.
I²C bus, SCC signals and multipurpose I/O on PMC I/O.
On-board DC/DC generation .
Optional calendar clock and supercap for backuped SRAM.
Debug Ports via Engineering kit
RS232 serial link based on SMC UART.
JTAG - COP
BSP for VxWorks® and Linux® operating systems.Other RTOS (LynxOS,...) can be ported on request